166FSV-4-4 - SAE 45° Flare 90° Swivel Elbow

## Construction Manufactured from CA 360, CA 345 or CA377 brass ## Features - Economical fitting resists mechanical pullout - Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection ## Installation - Cut tubing squarely and clean tube end thoroughly to remove burrs. - Place nut onto tube. Place threaded end of nut toward end of tube. - Flare tube end with flaring tool to provide 45° flare. - Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for metal-to-metal seal. ## Note Flare tools are available, please contact Dixon for pricing and availability. ## Safety Notes - The PSI rating given is based on a temperature of 73°F (23°C) using copper tubing. - Temperature and type of tubing used are important factors in working pressure ranges. ## Specifications Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards). ## Use - Manufactured especially for hard-to-hold liquids and gases - Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared ## Prop 65 Warning **WARNING**: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.