Description
## Compatibility & Interchange Data
- ARO 210
- Hansen 210/310
## Construction
- Machined components are manufactured using solid bar stock.
- Stainless steel springs. Carbon steel balls and retaining rings.
- Nitrile (Nitrile Rubber) seals are standard
- Steel componentry is plated using ROHS Compliant Trivalent Chrome.
## Safety Notes
It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
## Specifications
- Rated pressure for connected Steel Coupler & Steel Plug: 300 PSI (20 bar) Maximum Working and 2,600 PSI (179 bar) Burst
- Rated pressure for connected Steel Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 5,000 PSI (345 bar) Burst
## Prop 65 Warning
**WARNING**: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Specifications
| Weight | 0.215 lb |
|---|---|
| Break Quantity | 1 |
| Optional Package/Box Quantity | 1 |
| Material | Brass/Steel |
| Maximum OD | 1.06" (27 mm) |
| Thread | Male NPTF |
| Seal | Nitrile |
| Body Size | 1/4" |
| Temperature Range | -40°F to 250°F (-40°C to 121°C) |
| Thread Size | 1/4"-18 |
| Length | 1.72" (43.6 mm) |
| Hex | 13/16" |
| Flow | DELTA P=15 PSI 22 CFM after pressure rating. |
| Pressure Rating | See Product Details |
| Compatibility & Interchange Data | ARO 210 Hansen 210/310 |
| Construction | Machined components are manufactured using solid bar stock. Stainless steel springs. Carbon steel balls and retaining rings. Nitrile (Nitrile Rubber) seals are standard Steel componentry is plated using ROHS Compliant Trivalent Chrome. |
| Safety Notes | It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure. |
| Specifications | Rated pressure for connected Steel Coupler & Steel Plug: 300 PSI (20 bar) Maximum Working and 2,600 PSI (179 bar) Burst Rated pressure for connected Steel Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 5,000 PSI (345 bar) Burst |
| Prop 65 Warning | WARNING : This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. |
PDF Documents
DPL426_page 214.pdf
Open PDF