Description
## Applications
Low Pressure Air/Water: Ideal for pneumatic tools, compressor lines, and contractor water hoses. Quick Disconnect: Useful in situations requiring frequent connect/disconnect, where the gasket ensures a seal without extreme torque. General Industry: Non-critical applications where low cost and easy sealing are prioritized.
## Construction
- Gasket seat type
- These fittings have a flat sealing surface inside the swivel nut that compresses a pre-installed gasket (neoprene) against the male connector end
## Specifications
- Stem Length: 1.20"
- Nut Length: .53"
- Number of Barbs: 4
- Barb Length: .97"
## Use
All standard hose fittings are intended for use with hose clamps or crimped ferrules.
## Features
- Swivel Design: The nut and tail design allows for easy assembly without twisting the hose, making them ideal for tight spaces or where regular disconnection is needed.
- Advantages: Easy to create a leak-proof seal by hand or with minimal tools; forgiving of less-than-perfect mating surfaces.
## Note
Gaskets can degrade due to chemicals, heat, or wear, leading to leaks over time.
## Safety Notes
Not a Live Swivel: These fittings are not designed for constant, continuous rotation under pressure
## Prop 65 Warning
**WARNING**: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Specifications
| Weight | 0.045 lb |
|---|---|
| Break Quantity | 1 |
| Optional Package/Box Quantity | 1 |
| Material | Brass |
| Female Thread | NPSM |
| Hose ID | 1/4" |
| Hex | 5/8" |
| Female Thread Size | 1/4" |
| Applications | Low Pressure Air/Water: Ideal for pneumatic tools, compressor lines, and contractor water hoses. Quick Disconnect: Useful in situations requiring frequent connect/disconnect, where the gasket ensures a seal without extreme torque. General Industry: Non-critical applications where low cost and easy sealing are prioritized. |
| Construction | Gasket seat type These fittings have a flat sealing surface inside the swivel nut that compresses a pre-installed gasket (neoprene) against the male connector end |
| Specifications | Stem Length: 1.20" Nut Length: .53" Number of Barbs: 4 Barb Length: .97" |
| Use | All standard hose fittings are intended for use with hose clamps or crimped ferrules. |
| Features | Swivel Design: The nut and tail design allows for easy assembly without twisting the hose, making them ideal for tight spaces or where regular disconnection is needed. Advantages: Easy to create a leak-proof seal by hand or with minimal tools; forgiving of less-than-perfect mating surfaces. |
| Note | Gaskets can degrade due to chemicals, heat, or wear, leading to leaks over time. |
| Safety Notes | Not a Live Swivel: These fittings are not designed for constant, continuous rotation under pressure |
| Prop 65 Warning | WARNING : This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. |
| Stem Length | 1.20" |
| Nut Length | .53" |
| Number of Barbs | 4 |
| Barb Length | .97" |
| Advantages | Easy to create a leak-proof seal by hand or with minimal tools; forgiving of less-than-perfect mating surfaces. |
| Not a Live Swivel | These fittings are not designed for constant, continuous rotation under pressure |