Description
## Compatibility & Interchange Data
- Lincoln Long-Nose Automotive Interchange
- Parker 70-Series, Tomco Series-1110, Coilhose Type-17
## Construction
- Machined components are manufactured using solid bar stock.
- Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
- Nitrile (Nitrile Rubber) seals are standard
- Steel componentry is plated using ROHS Compliant Trivalent Chrome.
## Safety Notes
It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
## Prop 65 Warning
**WARNING**: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Specifications
| Maximum Operating Pressure | 300 PSI (21 bar) |
|---|---|
| Weight | 0.06 lb |
| Break Quantity | 1 |
| Optional Package/Box Quantity | 1 |
| Material | Steel |
| Maximum OD | 0.65" (16.5 mm) |
| Thread | NPT |
| Seal | Nitrile |
| Body Size | 1/4" |
| Temperature Range | -40°F to 250°F (-40°C to 121°C) |
| Burst Pressure | 5000 PSI (345 bar) |
| Thread Size | 1/4"-18" |
| Length | 2.25" (57.2 mm) |
| Hex | 9/16" |
| Flow | DELTA P=15 PSI 21 CFM |
| Compatibility & Interchange Data | Lincoln Long-Nose Automotive Interchange Parker 70-Series, Tomco Series-1110, Coilhose Type-17 |
| Construction | Machined components are manufactured using solid bar stock. Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life. Nitrile (Nitrile Rubber) seals are standard Steel componentry is plated using ROHS Compliant Trivalent Chrome. |
| Safety Notes | It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure. |
| Prop 65 Warning | WARNING : This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. |
PDF Documents
2026 Quick Coupling Catalog
Open PDF
Dual-Lock P-Series
Open PDF
Outside Air Applications
Open PDF
Dixon Retail Brochure
Open PDF
Petrochemical Life Cycle Exploration And Production
Open PDF
W-Series
Open PDF
WS Series 2021
Open PDF
BOP-Series Blowout Preventer Couplings
Open PDF
CNG-Series Quick Disconnect Couplings
Open PDF
VEP Series
Open PDF
Fabulous Five Quick Couplings
Open PDF
ST-Series
Open PDF
V Series
Open PDF
HT-Series-Repair-Instructions-Plug.pdf
Open PDF
HTE-Series Plugs
Open PDF
AG-Series Agricultural Couplings
Open PDF
DPL426_page 218.pdf
Open PDF