4-DTTF-4 - Instrumentation Female Branch Tee

## Applications Applications include: high pressure, high temperature, nitrogen, helium, flammable gases, hydraulic gases, corrosive media and pneumatic automation. ## Compatibility & Interchange Data Fully interchangeable with Swagelok® and Parker A-Lok® fittings ## Construction - ASTM material construction - 316 stainless steel ## Features - Double collet (ferrule) swaging action - Two positive seal points ## Installation - Cut tubing squarely and clean tube end thoroughly to remove burrs. - Insert tubing into the assembly making sure the tubing seats firm against the shoulder of the body and the nut is finger tight. - Tighten the nut with a wrench 1-1/4 turns, while holding the body with a second wrench. ## Note Instrumentation fittings come completely assembled. ## Safety Notes - Never connect, disconnect or remake a fitting with pressure in the system. - Make sure all fittings are properly installed. - It is not recommended to go beyond the pressure rating of the tubing. Elongation could occur in the tubing, shrinking the wall thickness and cause potential harm. - For proper sealing it is recommended that the tubing and fittings be of like material. - Always use proper thread lubricant and sealants on tapered pipe threads. - Never bleed a system by loosening a fitting. ## Specifications ASTM F 1387 Certified ## Prop 65 Warning **WARNING**: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.